Check and tighten slack tape before use with a pencil to avoid •
jamming the deck mechanism.
The volume level is set automatically.•
Tip
No recording at beginning 7 seconds. •
Break safeguard tab to prevent the accidental erasure of a recording. •
Record from CD/USB to tape
1 Slide the source to CD/USB.
2 Insert a CD/USB device.
3 (Optional) Set playing sequence (see “ Program tracks “
section).
4 Press to open the tape door.
5 Insert a blank cassette.
6 Press to start recording.
Disc play starts automatically from the beginning of the disc. »
To pause/resume recording, press•
.
To stop recording, press•
.
Record from radio to tape
1 Slide the source selector to FM.
2 Rotate TUNING to tune to the radio station.
3 Press to open the tape door.
4 Insert a blank tape.
5 Press to start recording.
To pause/resume recording, press •
.
To stop recording, press •
.
To Next Page
Loading...
