Philips AZ305 - Play from an External Device; 5 Product Information; Specifications

9 EN
Play from an external device
You can also listen to an external audio device
through this unit.
1 Switch the source selector to Audio-in.
2 Connect an audio cable (3.5mm, not
supplied)to:
• the Audio-in socket on the unit.
• the headphone socket on an external
device.
3 Play the external device (see the device's
usermanual).
Note
• The Audio-in socket is not for headphones.
5 Product
information
Note
• Product information is subject to change without prior
notice.
Specications
Amplier
Rated Output Power 2 x 1 W RMS
Frequency Response 63 -14000 Hz, -3 dB
Signal to Noise Ratio >57 dBA
Total Harmonic Distortion <1 %
Audio-in Input 650 mV RMS
Disc
Total Harmonic Distortion <1%
Frequency Response 63 -14000 Hz, -3 dB
Signal to Noise Ratio >57 dBA
Tuner
Tuning Range FM: 87.5 - 108MHz
Total Harmonic Distortion <3 %
Signal to Noise Ratio >50 dBA
Speakers
Speaker Impedance 8 ohm