Philips AZ3856 - Install Remote Control Batteries; Connect Power

Install remote control batteries
Caution
Risk of explosion! Keep batteries away from heat, sunshine or •
re. Never discard batteries in re.
Risk of decreased battery life! Never mix different brands or
•
types of batteries.
Risk of product damage! When the remote control is not used
•
for long periods, remove the batteries.
For rst-time use:
1 Remove the protective tab to activate the remote control batteries.
To replace the remote control batteries:
1 Open the battery compartment.
2 Insert 1 CR2025 batterie with correct polarity (+/-) as indicated.
3 Close the battery compartment. (See 4)
Connect power
Warning
Risk of product damage! Ensure that the power supply voltage •
corresponds to the voltage printed on the back or the underside of the
apparatus.
Risk of electric shock! When you disconnect the AC power, always pull
•
the plug from the socket. Never pull the cord.
Note
Install the apparatus near the power supply socket and where •
the power plug can be easily reached.