Philips AZ420 - 4 Play; Play CD; Play from USB devices

8 EN
4 Play
Play CD
1
Open the disc compartment and insert a
disc with the printed side facing up.
2 Press SOURCE repeatedly to select the
CD source.
»
Displayed on the panel.
• To pause/resume play, press
.
• To stop play, press
.
• To skip to a track, press
/ .
• To search within a track, press and hold
/ . Release to resume normal
play.
• To select an album, press ALBUM +/-.
Play from USB devices
Note
•
Ensure that the USB device contains playable audio
contents for supported formats.
• The USB terminal can be loaded with 700 mA.
1 Insert the USB connector on the device
into the
socket.
2 Press SOURCE repeatedly to select the
USB source.
»
displayed on the panel.
• Press
to pause/resume play.
• Press
/ toselectale.
• Press
to stop play.
• To search within a track, press and hold
/ . Release to resume normal
play.
• To select an album, press ALBUM +/- .
Listen to an external device
You can also listen to an external audio device
through this unit.
1 Connect the AUDIO IN cable to
• the AUDIO IN socket on this unit.
• the headphone socket on an external
device.
2 Press SOURCE repeatedly to select
AUDIO IN source.
»
displayed on the panel.