Philips AZ420 - 7 Listen to the Radio; Tune to a Radio Station; Program Radio Stations Automatically; Program Radio Stations Manually

12 EN
7 Listen to the
radio
Tune to a radio station
Note
•
For optimal reception, fully extend and adjust the
position of the FM antenna.
1 Press SOURCE repeatedly to select FM
mode.
»
displayed on the panel.
2 Press and hold / for more than
2 seconds.
» The radio tunes to a station with
strong reception automatically.
3 Repeat step 2 to tune to more stations.
• To tune to a weak station, press
/
repeatedlyuntilyoundoptimal
reception.
Program radio stations
automatically
Note
•
You can program a maximum of 10 FM radio stations.
In tuner mode, press and hold PROG for 2
seconds to activate automatic program mode.
» [AUTO](auto)isdisplayed.
» All available stations are programmed
in the order of waveband reception
strength.
» Therstprogrammedradiostationis
broadcast automatically.
Program radio stations
manually
Note
•
You can program a maximum of 10 FM radio stations.
1 Tune to a radio station.
2 Press PROG to activate program mode.
» [PROG](program)blinksonthe
display.
3 Press / or number buttons to
allocate a number to this radio station,
then press PROGtoconrm.
• Station 1-5: Press
3
4
5
to
select corresponding stations.
• Track 6-10: 1. Press
5+
. ("5"asheson
thedisplaypanel)
2. Press a second number button within 5
seconds to select the total station number.
(For example, if you press
5+
and then
3
,
station8willbeselected.)
» The preset number and the frequency
of the preset station are displayed.
4 Repeat the above steps to program other
stations.
Note
•
To overwrite a programmed station, store another
station in its place.
Select a preset radio station
In tuner mode, press / or number
buttons to select a preset radio station.