Philips AZB798T - Playing Audio Sources; Playing a CD; Playing from USB Devices; Playing from Bluetooth Devices

9EN
4 Play
Play CD
1 Press CD to select the disc source.
2 Press OPEN•CLOSE to open the disc tray.
3 Insert a disc with the printed side facing up,
then close the disc tray.
» Play starts automatically.
Play from USB devices
Note
• Make sure that the USB device contains playable audio
content.
1 Press USB to select USB source.
2 Insert the USB device into the socket.
» Play starts automatically. If not, press
.
Note
• The maximum current for USB is 0.5A.
Play from Bluetooth-enabled
devices
With this product, you can listen to audio from
Bluetooth-enabled devices.
Note
• WOOX Innovations does not guarantee the
compatibility with all Bluetooth devices.
• Before pairing a device with this product, read its user
manual for Bluetooth compatibility. Make sure that the
connected Bluetooth device supports the Advanced
Audio Distribution Prole (A2DP) and the Audio Video
Remote Control Prole (AVRCP).
• The product can connect a maximum of 8 Bluetooth
devices simultaneously.
• Make sure that Bluetooth function is enabled on your
device, and your device is set as visible to all other
Bluetooth devices.
• The operational range between this product and a
Bluetooth device is approximately 10 meters (33 feet).
• Any obstacle between this product and a Bluetooth
device can reduce the operational range.
• Keep away from any other electronic device that may
cause interference.
1 Press BT to select Bluetooth source.
» [BLUETOOTH](Bluetooth) is
displayed.
» The CD sound machine enters pairing
mode, and [PAIRING] (Pairing) is
displayed on the screen.