Philips AZB798T - Playback Options; Controlling Playback; Adjusting Sound Settings

12 EN
5 Play options
Control play
In CD or USB mode, you can control play
through the following operations.
/ Press and hold to fast-forward
or fast-reverse the track during
playback, then release to resume play.
/ Skip to the previous or next MP3
album.
/ Skip to the previous or next track.
Start or pause play.
Stop play.
MODE [ ]: Play the current track
repeatedly.
[ ]: Play all tracks repeatedly.
[ ]: Play tracks randomly.
Tip
• Only [ ] and [ ] can be selected when you
play the programmed tracks.
Program tracks
In CD or USB mode, you can program a
maximum of 20 tracks.
1 Press to stop playback.
2 Press PROG to activate the program
mode.
» [PROG] (program) begin to blink.
3 For MP3 tracks, press ALBUM/PRESET +/-
to select an album.
4 Press / to select a track number, then
press PROG to conrm.
5 Repeat steps 3-4 to program more tracks.
6 Press to play the programmed tracks.
» During play, [PROG] (program) is
displayed.
• To erase the program, press twice.
• To review the program, when playback
is stopped, press and hold PROG for
2 seconds.
Adjust sound
During play, you can adjust volume and select
the sound effects.
Key Function
VOL +/- Increase or decrease volume.
Mute or resume sound.
DBB Turn dynamic bass enhancement
on or off.
SOUND Select a preset sound effect:
POWERFUL (powerful);
BALANCE(balance);
WARM(warm); BRIGHT(bright),
and CLEAR(clear),