Philips BDP2205 - Video, audio and picture options

4 Performance Specifications
4.1 Audio Performance
4.1.1 Analogue Audio Outputs
NA.
4.1.2 Digital Audio Outputs
Standard Reference:
 IEC60958
 IEC61937
4.1.2.1 Coaxial Output
Description Specification Test Condition
Output Signal Amplitude 0.5Vpp ± 20%
75 termination
Output Impedance 75 ± 20%
DC Output Voltage < 0.05V
75 termination
Clock Accuracy
< 100ppm (typical)
< 1000ppm (maximum)
T
rise
and T
fall
< 0.4UI
Intrinsic Jitter < 0.05UI
Weighted High Pass Filter used
(-3dB at 700Hz, -20dB at70Hz).
For specific TOSLINK requirements, refer to Jeita CP-1212 standard.
4.2 Standard DefinitionAnalogVideo Performance
4.2.1 CVBS
NA
4.2.2 Component Video (Y/P
b
/P
r
)
NA
4.3 High DefinitionAnalogVideo Performance
4.3.1 720p Component Video (Y/P
b
/P
r
)NA
4.3.2 1080i Component Video (Y/P
b
/P
r
)NA
4.4 FNAC Requirement
NA
4.5 HDMI
Standard Reference:
 High-Definition Multimedia Interface Specification version 1.3a
 High-Definition Multimedia Interface Compliance Test Specification version 1.3c
 HDMI 1.4 content type
2-1