10 EN
4 Optional
placement
The design of this product allows you to
place this product in the following ways:
• Horizontal placement on the
tabletop.
• Vertical placement on the tabletop.
• Wall mount
You may simply place this product
horizontally on the tabletop.
Vertical placement
You may place this product vertically
on the tabletop. See the section of the
quick start guide in this user manual for
placement illustration.
1) Assemble the supplied brackets.
2) Fix the assembled bracket to this
product.
Wall mount
Note
•
Before wall mounting, make sure the wall
can support the weight of this product.
• For wall mounting, this product must be
securely attached to the wall in accordance
with the installation instructions. Improper
wall mounting may result in accident, injury
or damage. If you have any query, contact
Consumer Care in your country.
You may mount this product on the
wall. See the section of the quick start
guide in this user manual for placement
illustration.
1) Fix the supplied bracket to this
prodcut.
2) Drill two holes on the wall, then
secure the dowels and screws in the
holes.
3) Hang this product on the wall.
To Next Page
Loading...
