18
: Set to 3D or 2D
output when playing a Blu-ray 3D disc.
The player must be connected to a 3D
TV through HDMI.
If you change a setting, make sure that the TV supports
the new setting.
For settings related to HDMI, the TV must be
connected through HDMI.
For the composite connection (via the
connector), select a video resolution of 480i/576i
or 480p/576p under to enable video
output.
1 Press .
Select > to access the
audio setup options.
: Select quiet or full
dynamic sound. Night mode decreases
the volume of loud sound and
increases the volume of soft sound
(such as speech).
: Enable or disable a surround
sound effect which is converted from
2.0 channel audio.
: Set an HDMI audio
format when this player is connected
through HDMI.
: Select an audio format
for the sound output when this
player is connected through a digital
connector (coaxial).
: Set the
sampling rate for PCM audio output
when this player is connected through
a digital connector (coaxial).
: Set up Karaoke function
For settings related to HDMI, the TV must be
connected through HDMI.
Night mode is only available for Dolby encoded DVD
and Blu-ray discs.
1 Press .
Select > to access the
network setup options.
: Start a wired
or wireless installation to make the
network work.
: Display the
current network status.
: Display the
current Wi-Fi status.
: Re-name this
network.
1 Press .
Select > to access
the preference setup options.
: Select an onscreen
display menu language.
: Select an audio language for
video.
: Select a subtitle language for
video.
: Select a menu language
for a video disc.
: Restrict access to
discs that are encoded with ratings.
BDP3380K_51_UM_V1.0.indb 18 2012-2-23 11:43:41
To Next Page
Loading...
