Philips BDP7750/96 - Sound; Network (Installation

11
English
EN
• [User]: Select a personalized picture
setting. This option is activated only when
[User] under [Picture settings] is selected.
• [Watch 3D video]: Set to 3D or 2D
output when playing a Blu-ray 3D disc.
The player must be connected to a 3D TV
through HDMI.
Note
•
If you change a setting, make sure that the TV supports
the new setting.
• For settings related to HDMI, the TV must be
connected through HDMI.
• For the composite connection (via the VIDEO
connector), select a video resolution of 480i/576i
or 480p/576p under [HDMI video] to enable video
output.
Sound
1
Press .
2 Select [Setup] > [Audio] to access the
audio setup options.
• [Night mode]: Select quiet or full dynamic
sound. Night mode decreases the volume
of loud sound and increases the volume of
soft sound (such as speech).
• [Neo 6]: Enable or disable a surround
sound effect which is converted from
2.0 channel audio.
• [HDMI Audio]: Set an HDMI audio format
when this player is connected through
HDMI.
• [Digital Audio]: Select an audio format
for the sound output when this player is
connected through a digital connector
(COAXIAL or OPTICAL).
• [PCM Downsampling]: Set the sampling
rate for PCM audio output when this
player is connected through a digital
connector (COAXIAL or OPTICAL).
• [Channels]: Select 7.1 channel sound, or
2 channel / 5.1 channel sound according to
multichannel connection.
• [Speaker setup]: Set the volume level and
distance of each speaker to obtain the best
possible surround sound.
Note
•
For settings related to HDMI, the TV must be
connected through HDMI.
• Night mode is only available for encoded DVD
and Blu-ray discs.
Network (installation...)
1
Press .
2 Select [Setup] > [Network] to access the
network setup options.
• [Network installation]: Start a wired or
wireless installation to make the network
work.
• [View network settings]: Display the
current network status.
• [View wireless settings]: Display the
current Wi-Fi status.
• [Clear Smart TV memory]: This feature is
not available on this version.
• [Name your Product:]: Re-name this
player for identication in a home network.
• [Miracast]: Turn on or off Miracast.
• [Miracast browser]: Scan for Miracast
devices.
• [Miracast role]: Force this player to be
Group Owner or automatically choose a
device to be Group Owner.
• [Auto]: The role of Group owner is
automatically determined between the
source device and this player when
connection is established.
• [Group Owner]: Force this player to
be Group Owner and allow it to select
the channel to use for establishing the
link with the source device.
BDP7750_96_UM_V4.0.indb 11 2016/4/28 17:35:30