Philips BDP7750 - Rent Online Videos; Stream Multimedia Via Miracast

17
English
EN
5 Use the remote control to navigate and
select an Internet application.
Button Action
Navigate and select an a
service or item.
OK Conrm a selection.
Return to a previous page, or
delete input text.
Access options related to a
current activity.
Alphanumeric
buttons
Input text (such as an email
address, web URL and
password).
TOP MENU Return to the Smart TV home
screen.
To remove the passwords and cookies from
this player, see the section: Change settings >
Network (installation, Smart TV...).
Rent online videos
Rent videos from online stores through this
player.
What you need
• A high-speed Internet connection to this
player.
• An HDMI connection between this player
and the TV.
• A USB storage device, with at least 8 GB
memory.
Note
• Use a blank USB storage device. Formatting a USB
storage device erases any content on the USB storage
device.
• This service is country dependent.
1 Connect this player to the Internet (see
"Set up a network").
2 Insert a blank USB storage device into the
USB connector located on the rear panel
of this player.
3 Press .
4 Select [Smart TV], and press OK.
» The online services available in your
country are displayed.
5 Select a video store, and follow the
onscreen instructions to rent and watch a
video.
» The video is downloaded to the USB
storage device. You can watch it now
or at any time within the rental period.
» For the downloaded video on the USB
storage device, you can watch it only
on this player.
6 Use the remote control to play and
control the video.
Stream multimedia via
Miracast
Through this player, you can stream audio and
video from a Miracast certied device to your
TV.
Before you start
• Enable Miracast on the Miracast certied
source device, such as a smartphone, a
tablet (refer to a related user manual for
details.)
1 Press .
2 Select [Setup] > [Network] > [Miracast]
> [On].
» Miracast is enabled on this player.
3 On the Miracast source device, initiate
the search for this player and select this
player when it is found (refer to the source
device’s user manual for details).
• If this is the rst time these 2 devices
are paired, an acknowledgement
message is displayed on your TV.
Accept it to continue the pairing.
• To cancel the pairing, press on the
remote control.
BDP7750_98_UM_V1.0.indb 17 8/5/2013 11:44:05 AM