Philips BFL2114/12 Series - Premises Geonames ID; Device Name; Installer Identification

- 38 -
o [Custom Name]: Define the custom
name for the premises
Note: The Premises Name can be seen
in the default dashboard
6.5.3 Premises Geonames ID
o Navigate to the [Identification Settings]
[Premises Geonames ID] menu
o You can set the ID of the Geonames
location. This is used for the weather
service
You can find the ID on
www.geonames.org, search for your
location, open it and check the location ID
as marked in the screenshot on the left
6.5.4 Device Name
o Navigate to the [Identification Settings]
[Device Name] menu
o You will see below items:
o [Force Custom Name]: When [On]
the custom defined name will be
used, when [Off] the RoomID will be
used (RoomXXXXX)
o [Custom Name]: Define the TV name
to show on mobile devices for casting
6.5.5 Installer Identification
o Navigate to the [Identification Settings]
[Installer Identification] menu
o You will see below items:
o [Chain]: Fill in the hotel chain name
o [Brand]: Fill in the hotel Brand name
o [System Integrator]: Fill in the system
integrator name
Note: This data might be used in feature
for analytics information (GDPR
compliant)