Philips BFL2114/12 Series - Content Rating; Clock; Scheduler

- 49 -
6.8.6 Content Rating
o Navigate to the [Content Rating] menu
o You will see below items:
o [Enable]: You can enable the content
rating via [Yes] or disable via [No]
o [PIN Code]: You can set the pin code
that is needed to show the content
when you are on a rated channel
Note: By default, the PIN code is set to
8888
6.8.7 Clock
o Navigate to the [Clock] menu. Here you
can make changes for the (external) clock.
In order to have a functional external clock
the [Advanced][Power][Standby Mode]
needs to be set to [Fast]
o You will see below items:
o [Display Clock on Radio Channel]:
When you are on a radio channel you
will see a radio background when [No]
is selected, when [Yes] is selected you
will see a clock instead of the radio
background
o [External Clock]:
▪ [External Clock]: You disable the
external clock via [Off] or enable it
via [On]
▪ [Brightness at Low light]: Via a
slider you can set the clock
brightness at low light environment
▪ [Brightness at Intense Light]: Via a
slider you can set the clock
brightness at intense light
environment
▪ [Light sensor Sensitivity]: Via a
slider you can change the light
sensor sensitivity
Note: Above menus are only
accessible when [External Clock] is
set to [On]
6.8.8 Scheduler
o Navigate to the [Scheduler] menu
o You will see below items:
o [Enable]: You can enable the scheduler
using [Yes] or disable using [No]
o [Manage]: You will be able to manage
the Scheduler, see chapter ‘Manage
Scheduler’ for more details