Philips BTM2056 - Reception Adjustment; Extended Features; Alarm and Sleep Timers

14EN
Select stereo/mono broadcast
Note
•
Stereo broadcast is the default setting for tuner mode.
• For stations with weak signals: to improve the reception,
change to monaural sound.
In FM tuner mode, press to switch between
mono and stereo broadcast.
6 Other features
Set the alarm timer
This system can be used as an alarm timer.
You can select CD, FM tuner, or USB as alarm
source.
Note
•
Make sure that you have set the clock correctly.
1 In standby mode, press and hold TIMER
until [SET TIMER] (set timer) scrolls on the
display.
» [SELECT SOURCE] (select source) is
displayed.
2 Press SOURCE repeatedly or the source
selection buttons on the remote control to
select a source: disc, FM tuner, or USB.
3 Press TIMERtoconrm.
» The hour digits blink.
4 Press or to set the hour.
5 Press TIMERtoconrm.
» The minute digits blink.
6 Repeat steps 4-5 to set the minute and
alarm volume.
Tip
•
If the system is idle for 90 seconds, it exits alarm setting
mode automatically.
To activate or deactivate the alarm timer:
In standby mode, press TIMER repeatedly to
activate or deactivate the alarm.
»
appears when the alarm timer is activated.
Tip
•
If CD or USB is selected as alarm source, yet there
is no disc inserted or no USB connected, the system
switches to the tuner source automatically.