Philips CD 191 - Deactivate Auto Removal of the Area Code; Set Auto Prefix; Network Type; Auto Prefix

24 EN
2 Select [Services] > [Area code], then
press MENU/OK to conrm.
3 Enter the area code, then press MENU/
OK to conrm.
» The setting is saved.
Deactivate auto removal of the area
code
1 Press MENU/OK.
2 Select [Services] > [Area code], then
press MENU/OK to conrm.
3 Press REDIAL/C to delete the digits.
4 Press MENU/OK to conrm.
» The setting is saved.
Network type
Note
• This feature only applies to models with network type
support.
1 Press MENU/OK.
2 Select [Services] > [Network type], then
press MENU/OK.
3 Select a network type, then press MENU/
OK.
» The setting is saved.
Auto prex
This feature checks and formats your outgoing
call number before it is dialed out. The prex
number can replace the detect number you
set in the menu. For example, you set 604 as
the detect number and 1250 as the prex.
When you have dialed out a number such as
6043338888, your phone changes the number
to 12503338888 when it dials out.
Note
• The maximum length of a detect number is 5 digits. The
maximum length of an auto prex number is 10 digits.
Note
• This is a country dependent feature.
Set auto prex
1 Press MENU/OK.
2 Select [Services] > [Auto prex], then
press MENU/OK to conrm.
3 Enter the detect number, then press
MENU/OK to conrm.
4 Enter the prex number, then press
MENU/OK to conrm.
» The setting is saved.
Note
• To enter a pause, press and hold .
Note
• If the prex number is set and the detect number is left
empty, the prex number is added to all outgoing calls.
Note
• The feature is unavailable if the dialed number starts
with * and #.
Select the recall duration
Make sure that the recall time is set correctly
before you can answer a second call. In normal
case, the phone is already preset for the recall
duration. You can select among 3 options:
[Short], [Medium] and [Long]. The number of