Philips CE135BT - Play audio from a Bluetooth device; Make a call; Reject an incoming call; End a call

14 EN
Play audio from a Bluetooth
device
If the connected Bluetooth device supports
Advanced Audio Distribution Prole (A2DP),
you can listen to tracks that are stored on the
device through the system. If the device also
supports Audio Video Remote Control Prole
(AVRCP) prole, you can control play on the
system or with its remote control.
1 Play a track on the connected device.
2 Press SOURCE repeatedly to switch the
source to [BT AUDIO].
» Play starts automatically.
• To pause or resume play, press .
• To skip to the previous or next track,
press / .
Note
• If the connected device does not support the AVRCP
prole, control play on the connected device.
Make a call
Note
• Keep the Bluetooth connection active between the
system and your mobile phone.
Call a number
On your mobile phone, call a number.
» [CALLING] is displayed.
Pick up an incoming call
When the system receives an incoming call, the
phone number or [PHONE IN] is displayed.
Press to answer the call.
Reject an incoming call
Press and hold until [END] is displayed.
End a call
To end an on-going call, press .