Philips CE152 - Play Audio from a Bluetooth Device; Make a Call

21EN
Play audio from a Bluetooth
device
If the connected Bluetooth device supports

you can listen to tracks that are stored on the
device through the system. If the device also


system.
1 Play a track on the connected device.
2 Press AS/SOURCE repeatedly to switch
the source to [BT AUDIO].
» Play starts automatically.
 To pause or resume play, press
.
 To skip to the previous or next track,
press
/ .
Note
 If the connected device does not support the AVRCP

Make a call
Note
 Keep the Bluetooth connection active between the
system and your mobile phone.
Call a number
On your mobile phone, call a number.
» [CALLING] is displayed.
Redial the last called number
1 Press .
» [REDIAL] is displayed.
2 Press 
» [CALLING] is displayed.
Pick up an incoming call
When the system receives an incoming call, the
phone number or [PHONE IN] is displayed.
Press
to answer the call.
Reject an incoming call
Press and hold until [END] is displayed.
End a call
To end an on-going call, press .
Transfer a call to mobile phone
By default, the voice comes from the
loudspeakers during a call.
1 Press and hold until [TRANSFER] is
displayed.
» The loudspeakers are muted, and the
voice comes from your mobile phone
only.
2 Take up your mobile phone for the
conversation.