Philips CEM210/51 - Store Radio Stations in Memory; Tune to a Preset Station; Play with RDS

16
Receive traffic announcement
If you do not want to miss traffic
announcement during enjoying music, you
can turn on the TA (Traffic Announcement)
function.
1 Press MENU/DISP for 3 seconds.
2 Press or repeatedly until [TA] is
displayed.
3 Turn to select a setting:
• [TA ON]: When there is traffic
announcement, the unit switches
to the tuner mode (regardless of
the current mode) and begins to
broadcast the announcement on
traffic conditions. When the traffic
announcement is over, it returns to
the previous mode.
• [TA OFF]: Traffic announcement
does not cut in.
Set RDS clock
You can use time signal that is broadcast
together with the RDS signal to set the clock
of the unit automatically.
1 Press MENU/DISP for 3 seconds.
2 Press or repeatedly until [CT] is
displayed.
3 Turn to select a setting:
• [CT ON]: Turn on the RDS clock.
Time shown on the unit synchronize
with that on the RDS station.
• [CT OFF]: Turn off the RDS clock.
Tip
The accuracy of the transmitted time depends •
on the RDS station that transmits the time
signal.
Item Program type Description
23 LEISURE Leisure
24 JAZZ Jazz Music
25 COUNTRY Country Music
26 NATION M National Music
27 OLDIES Oldies Music
28 FOLK M Folk Music
29 DOCUMENT Documentary
30 TES Alarm Test
31 ALARM Alarm
Select alternate frequencies
If the radio signal come from the current
station is poor, you can turn on the AF
(Alternate Frequency) function to let the
unit searches for another station with
stronger signal but with the same program
identification as the current station
automatically.
1 Press MENU/DISP for 3 seconds.
2 Press or repeatedly until [AF] is
displayed.
3 Turn to select a setting:
• [AF ON]: Turn on the AF mode.
• [AF OFF]: Turn off the AF mode.
Set region for AF tuning
You can define AF tuning region:
[REG ON] Only stations in the current
region can be tuned to
automatically.
[REG OFF] All stations can be tuned to
automatically.
1 Press MENU/DISP for 3 seconds.
2 Press or repeatedly until [REG]
(Regional Radio) is displayed.
3 Turn to select a setting.
EN