Philips CVR700 - Insert Micro SD Card; Turn on the Driving Recorder; For the First Time Use; Mode Switch

7
English
EN
Insert Micro SD card
Caution
• Insert the micro SD card before using the driving
recorder.
• Insert the micro SD card with the right direction.
Wrong direction may damage the driving recorder and
the card.
Note
• The driving recorder can support the capacity of the
card up to 32GB.
• When using for rst time, please format the micro SD
card by pressing ( General Settings - Format SD
card) to ensure videos are recorded normally.
Insert a micro SD card into the card slot until
you hear a "click".
• To remove the micro SD card
Push the card inwards until you hear a "click".
» The card is disengaged.
Turn on the driving recorder
Press to turn on the driving recorder.
• To turn off the driving recorder, press and
hold for more than 3 seconds.
Note
• When using for the rst time, please set the date/time
by pressing (General Settings - Clock Settings).
For the rst time use
After the driving recorder is turned on, set the
language and format the micro SD card.
Select language
1 Press to enter the main menu.
2 Select language settings menu and press
OK to conrm.
3 Press / to select the language and
press OK to conrm.
Format SD card
1 Press to enter the main menu.
2 Select General Settings and press OK to
conrm.
3 Select SD card formatting to format the
micro SD card.
Mode switch
Press
M
repeatedly to select a mode: video
recording mode, photo capture mode, video
playback, photo playback.