12
Note
The type plate is located on the bottom of the •
main unit.
1 Connect the AC power cord to the wall
outlet.
Set time and date
1 In standby mode, press and hold SET
TIME for two seconds.
The hour digits begin to blink. »
2 Press to select the 12/24 hour
format.
3 Press / to set the hour
4 Press SET TIME to confirm.
The minutes digits begin to blink. »
5 Repeat steps 3-4 to set the minute, year,
month, and day.
Tip
In 12 hour format, [MONTH--DAY] is •
displayed.
In 24 hour format, [DAY--MONTH] is •
displayed.
You can press • to toggle between 12 hour
format and 24 hour format during the whole
process.
Turn on
1 Press POWER.
The unit switches to the last selected »
source.
MP3 LINK FM
ANTENNA
1 Open the battery compartment.
2 Insert 2 x R6/UM-3/AA size batteries
with correct polarity (+/-) as indicated.
3 Close the battery compartment.
Caution
Remove battery if it is exhausted or will not be •
used for a long time.
Batteries contain chemical substances, so they •
should be disposed of properly.
Perchlorate Material-special handling may •
apply. See www.dtsc.ca.gov/hazardouswaste/
perchlorate.
Prepare the remote control
Caution
Risk of explosion! Keep batteries away from •
heat, sunshine, or fire. Never discard batteries
in fire.
1 Open the battery compartment.
2 Insert one button battery with correct
polarity (+/-) as indicated.
3 Close the battery compartment.
Note
If you are not going to use the remote control •
for a long time, remove the batteries.
Connect power
Caution
Risk of product damage! Ensure that the power •
voltage corresponds to the voltage printed on
the back or underside of the apparatus.
Risk of electric shock! When you unplug the •
AC power cord, always pull the plug from the
socket. Never pull the cord.
Before connecting the AC power cord, ensure •
you have completed all other connections.
EN
To Next Page
Loading...
