15
Program radio stations
automatically
You can program a maximum of 20 preset
radio stations.
1 In the tuner mode, press and hold SET
TIME/PROG for more than 2 seconds to
activate automatic program mode.
[AUTO] (auto) is displayed. »
The unit automatically stores radio »
stations with sufficient signal strength.
The first programmed radio station is »
broadcast automatically.
Program radio stations
manually
You can program a maximum of 20 preset
radio stations.
1 Tune to a radio station.
2 Press SET TIME/PROG to activate the
program mode.
3 Press / to select a number.
4 Press SET TIME/PROG to confirm.
5 Repeat the above steps to program other
stations.
Tip
To overwrite a programmed station, store •
another station in its place.
To select FM stereo or FM mono, press • OK.
Select a preset radio station
1 Press / to select a preset number.
5 Listen to radio
Note
Only FM radio reception is available on this •
unit.
Tune to a radio station
Tip
Position the antenna as far as possible from •
TV, VCR or other radiation source.
Note
For optimal reception, fully extend and adjust •
the position of the antenna.
1 Press TUNER to select FM tuner.
2 Press and hold / for more than 2
seconds.
[SRCH] (search) is displayed. »
The radio tunes to a station with »
strong reception automatically.
3 Repeat step 2 to tune to more stations.
To tune to a weak station, press •
/
repeatedly until you find optimal
reception.
Tip
• [STEREO] is default setting for tuner mode.
Under tuner mode, you can press • OK
repeatedly to toggle between [STEREO] and
[MONO], and the unit memorizes your setting
even if you turn off the unit or turn to other
sources.
EN
To Next Page
Loading...
