14
1 Press MP3 LINK to select the MP3 link
source.
2 Connect the supplied MP3 link cable to:
the • MP3 LINK jack (3.5mm) on the
back of the unit.
the headphone jack on an external •
device.
3 Start to play the device (see the device
user manual).
To pause/resume play, press • OK/
.
To skip to a track, press •
/ .
To search during play, press and hold •
/ , then release to resume
normal play.
To go back to the previous iPod/•
iPhone menu, press MENU.
To scroll through the menu, press •
/ .
To confirm a selection, press • OK/
.
If no key is pressed for more than »
10 seconds, OK/
acts back as
the play/pause key.
Charge the iPod/iPhone/iPad
When the unit is connected to power, the
docked iPod/iPhone/iPad begins to charge.
Tip
For certain iPod models, it may take up to a •
minute before the charging indication appears.
If clock is not manually set, when iPod/iPhone/ •
iPad is connected, the clock radio synchronizes
time from the iPod/iPhone/iPad automatically.
Play from an external device
You can also listen to an external audio device
through this unit.
EN
To Next Page
Loading...
