15
6 Other features
Set the alarm timer
You can set two alarms which go off at different
time.
1 Ensure that you have set the clock correctly.
(See “Get started - Set time and date”.)
2 Press and hold ALM 1 or ALM 2 for 2
seconds.
[AL 1] or [AL 2] begin to blink. »
3 Press SOURCE on the top panel to select
an alarm sound source: iPod/iPhone, FM
tuner, or buzzer.
4 Press ALM 1 or ALM 2.
The hour digits begin to blink. »
5 Press / repeatedly to set the hour.
6 Press ALM 1 or ALM 2 to confirm.
The minute digits begin to blink. »
7 Repeat steps 5-6 to set the minute.
8 Repeat steps 5-6 to select whether to
ring alarm the whole week, on weekdays,
or at weekend.
9 Repeat steps 5-6 to set the alarm volume.
Tip
If you set iPhone/iPod playlist as the sound •
source, you must create a playlist in iTunes
called “PHILIPS” and import it to your iPhone/
iPod.
If no playlist is created in the iPod/iPhone or •
there is no song in the playlist, the unit will
wake to songs in the iPod/iPhone.
Activate and deactivate the alarm timer
1 Press ALM 1 or ALM 2 repeatedly to
activate or deactivate the timer.
If the timer is activated, [ »
AL 1] or
[
AL2] is displayed.
If the timer is deactivated, [ »
AL1] or
[
AL2] disappears.
All available stations are programmed »
in the order of waveband reception
strength.
The first programmed radio station is »
broadcast automatically.
Program radio stations
manually
You can program a maximum of 20 preset
radio stations.
1 Tune to a radio station.
2 Press SET TIME/PROG to activate the
program mode.
3 Press / to select a number.
4 Press SET TIME/PROG to confirm.
5 Repeat the above steps to program other
stations.
Tip
To overwrite a programmed station, store •
another station in its place.
Select a preset radio station
1 Press / to select a preset number.
English
EN
To Next Page
Loading...
