Philips DC320 - Radio Station Management; Manual Station Programming; Select Preset Station; Additional Features

19
Program radio stations manually
You can program a maximum of 20 preset radio stations.
1 Tune to a radio station.
2 Press SET TIME/PROG to activate the program mode.
3 Press PRESET +/- to select a number.
4 Press SET TIME/PROG to confirm.
5 Repeat the above steps to program other stations.
Tip
To overwrite a programmed station, store another station in its place. •
Select a preset radio station
1 Press PRESET +/- to select a preset number.
6 Other features
Set the alarm timer
You can set two alarms which go off at different time.
1 Ensure that you have set the clock correctly.
2 Press and hold ALM 1 or ALM 2 for 2 seconds.
[AL 1] or [AL 2] begin to blink. »
3 Press SOURCE to select an alarm sound source: iPod/iPhone, iPod/
iPhone playlist, FM tuner, or buzzer.
4 Press ALM 1 or ALM 2.
Hour digits begin to blink. »
5 Press / repeatedly to set the hour.
6 Press ALM 1 or ALM 2 to confirm.
Minute digits begin to blink. »
7 Repeat steps 5-6 to set the minute.
8 Repeat steps 5-6 to select whether to ring alarm the whole week, on
weekdays, or at weekend.
English
EN