20
9 Repeat steps 5-6 to set the alarm volume.
Tip
If you set iPhone/iPod playlist as the sound source, you must create a playlist in •
iTunes called “PHILIPS” and import it to your iPhone/iPod.
If no playlist is created in the iPod/iPhone or there is no song in the playlist, the unit
•
will wake to songs in the iPod/iPhone.
Activate and deactivate the alarm timer
1
Press ALM 1 or ALM 2 repeatedly to activate or deactivate the timer.
If the timer is activated, [ »
AL 1] or [ AL2] is displayed.
If the timer is deactivated, [ »
AL1] or [ AL2] disappears.
Repeat alarm
1
When the alarm rings, press BRIGHTNESS/REP ALM.
The alarm repeats ringing minutes later. »
Tip
You can press • / to adjust the interval to repeat alarm.
Stop alarm ring
1
When the alarm rings, press the corresponding ALM 1 or ALM 2.
The alarm stops but the alarm settings remain. »
View the alarm settings
1
Press ALM 1 or ALM 2.
Set the sleep timer
This unit can switch to standby automatically after a set period of time.
1 Press SLEEP repeatedly to select a set period of time (in minutes).
When the sleep timer is activated, the display shows »
, and the
volume will gradually decrease.
EN
To Next Page
Loading...
