11
English
2 Press DOCK on the remote control to
select iPod/iPhone/iPad source.
To pause/resume play, press • OK/
.
To skip to a track, press •
/ .
To search during play, press and •
hold
/ , then release to resume
normal play.
To go back to the previous iPod/•
iPhone/iPad menu, press MENU.
To scroll through the menu, press •
/ .
To confirm a selection, press • OK.
If no key is pressed for more than »
10 seconds, OK/
acts back as
the play/pause key.
Charge the iPod/iPhone/iPad
Note
iPod with color display, iPod classic, and iPod with •
video are not compatible with dock charging.
When the unit is connected to power, the
docked iPod/iPhone/iPad begins to charge.
Tip
For certain iPod models, it may take up to a minute •
before the charging indication appears.
Play from an external device
You can also listen to an external audio device
through this unit.
1 Press MP3 LINK to select the MP3 link
source.
2 Connect the supplied MP3 link cable to:
the • MP3 LINK socket (3.5mm) at
the back of this unit.
the headphone socket of an external •
device.
3 Start to play the device (see the user
manual of the device).
4 Play
Play from iPod/iPhone/iPad
You can enjoy audio from iPod/iPhone/iPad
through this unit.
Compatible iPod/iPhone/iPad
The unit supports the following iPod, iPhone
and iPad models:
Made for.
iPod touch (1st, 2nd, 3rd, and 4th •
generation)
iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th •
generation)
iPod mini•
iPhone 4•
iPhone 3GS•
iPhone 3G•
iPhone•
iPad•
Listen to the iPod/iPhone/iPad
1 Place the iPod/iPhone/iPad into the dock.
EN
To Next Page
Loading...
