14
Listen to a preset FM radio station
In FM tuner mode, press PRESET +/-
repeatedly to select a preset number.
Select stereo/mono broadcast
Note
Stereo broadcast is the default setting for FM tuner •
mode.
For stations with weak signals, to improve the
•
reception, change to monaural sound.
In FM tuner mode, press OK repeatedly to
switch between mono and stereo broadcast.
Show RDS information
RDS (Radio Data System) is a service that
allows FM stations to show additional
information. If you tune to a RDS station, the
station name is displayed.
1 Tune to an FM station with RDS signal.
2 Press INFO repeatedly to scroll through
the following information (if available):
Station name »
Radio text messages »
Program type such as » [NEWS]
(news), [SPORT] (sport), [POP M]
(pop music)...
Listen to FM radio
Tune to FM radio stations
1 Press FM/DAB to select FM tuner.
2 Press and hold TUNING +/- for 2
seconds.
The unit tunes to an FM radio station »
with strong reception automatically.
3 Repeat step 2 to tune to more FM
stations.
To tune to a weak station, press •
TUNING +/- repeatedly until you
find optimal reception.
Store FM radio stations automatically
You can store a maximum of 20 FM radio
stations.
In FM tuner mode, press and hold AUTO
SCAN for 2 seconds.
The unit stores all the available FM »
radio stations automatically and then
broadcasts the first available station.
Store FM radio stations manually
1 Tune to an FM radio station.
2 Press AUTO SCAN to activate the
storing mode.
3 Press PRESET +/- to select a number.
4 Press AUTO SCAN to confirm.
5 Repeat the above steps to store other
stations.
Tip
To remove a pre-stored station, store another •
station in its place.
EN
To Next Page
Loading...
