20
Reset to factory setting
1
In DAB/FM mode, press MENU to enter
the menu options.
2 Press / repeatedly until [System]
displays on the display panel.
3 Press to access the system menu.
» [Factory Reset] displays.
4 Press to enter factory reset menu.
The display panel shows options » [Yes]
and [No] under [Factory Reset].
5 Press / to select [Yes].
6 Press to confirm the DAB/FM factory
reset.
FM stations with RDS
Radio Data System (RDS) is a service that
sends additional broadcast information along
with FM stations.
If you listen to a FM station with RDS signal,
“RDS” displays.
Display RDS information
1 Tune to the desired RDS radio station on
the FM waveband.
2 Press RDS/DISPLAY on the remote
control repeatedly to switch through the
following information (if available):
Radio text message•
Program type (for example: News, •
Sport...)
Frequency•
Stereo/Mono Mode•
Time•
Date•
Note
•
[NO Radio Text], [NO PTY], [NO Name], [Mono],
[00:00:00] or [0-0-0000] displays if no RDS signal
is available.
Set RDS clock
You can use time signal broadcast together
with the RDS signal to set the clock of the
unit.
1 Tune to a RDS radio station that
transmits time signals.
2 Press and hold MENU.
[CLK Sync] is displayed. »
Note
The accuracy of the transmitted time depends on the •
RDS station that transmits the time signal.
EN
To Next Page
Loading...
