14
Program radio stations manually
You can program a maximum of 20 preset
radio stations (FM).
1 Tune to a radio station.
2 Press PROG to activate program mode.
[ » PROG] (program) is displayed.
3 Press PRESET +/- to allocate a number
to this radio station, then press PROG to
confirm.
4 Repeat the above steps to program other
stations.
Tip
To overwrite a programmed station, store •
another station in its place.
Select a preset radio station
In tuner mode, press PRESET +/- to select a
preset number.
You can also press the numeric buttons •
to select a preset number directly.
Tip
Position the antenna as far as possible from •
TV, VCR or other radiation source.
For optimal reception, fully extend and adjust •
the position of the antenna.
Show RDS information
RDS (Radio Data System) is a service that
allows FM stations to show additional
information. If you tune to an RDS station, an
RDS icon and the station name are displayed.
1 Tune to an RDS station.
2 Press RDS repeatedly to scroll through
the following information (if available):
Station name »
Program type such as » [NEWS] (news),
[SPORT] (sport), [POP M] (pop
music)...
RDS RT »
Frequency »
The connected iPod/iPhone/iPad plays »
automatically.
To pause/resume play, press •
.
To skip to a track, press •
/ .
To search during play, press and hold •
/ , then release to resume normal play.
Charge the iPod/iPhone/iPad
Note
iPod with color display, iPod classic, and iPod with •
video are not compatible with dock charging.
When the unit is connected to power, the
docked iPod/iPhone/iPad begins to charge.
Listen to radio
Tune to a radio station
1 Press SOURCE repeatedly to select the
tuner source.
2 Press and hold / for more than 2
seconds.
[ » SEARCH] (search) is displayed.
The radio tunes to a station with »
strong reception automatically.
3 Repeat step 2 to tune to more stations.
Tip
To tune to a weak station, press • /
repeatedly until you find optimal reception.
Program radio stations automatically
You can program a maximum of 20 preset
radio stations (FM).
In the tuner mode, press and hold PROG for
more than 2 seconds to activate automatic
program mode.
» AUTO SCAN (auto scan) is displayed.
All available stations are programmed in »
the order of waveband reception strength.
The first programmed radio station is »
broadcast automatically.
EN
To Next Page
Loading...
