17
If the timer is activated, the display »
shows
.
If the timer is deactivated, »
disappears on the display.
Note
If DISC/USB/iPhone/iPod/iPad source is •
selected and the track cannot be played, tuner
is activated automatically.
Play from external audio
device
You can play from an external audio device
such as MP3 player through this unit.
1 Connect the audio device.
For audio device with red/white •
audio output sockets:
Connect a red/white audio cable
(not supplied) to the AUX-IN
sockets and to the audio output
sockets on the audio device.
For audio device with headphone •
sockets:
Connect the supplied MP3-Link
cable to the MP3-LINK socket and
to the headphone socket on the
audio device.
2 Press SOURCE to select MP3-
LINK/AUX-IN source.
3 Play the device.
Adjust display brightness
Press DIM repeatedly to select different levels
of display brightness:
High brightness•
Mid brightness•
Low brightness•
7 Other features
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
When the unit is turned on, press SLEEP
repeatedly to select a set period of time (in
minutes).
When sleep timer is activated, the »
display shows [SLEEP](sleep)
.
To deactivate sleep timer
Press SLEEP repeatedly until “OFF” is displayed.
When sleep timer is deactivated, »
[SLEEP](sleep) disappears on the
display.
Set the alarm timer
This unit can be used as an alarm clock. The
DISC, TUNER, USB or iPhone/iPod/iPad is
activated to play at a preset time.
1 Ensure that you have set the clock
correctly.
2 Press and hold TIMER.
3 Press SOURCE to select a source.
4 Press TIMER to confirm.
The hour digits are displayed and begin »
to blink.
5 Press / to set the hour.
6 Press TIMER to confirm.
The minute digits are displayed and »
begin to blink.
7 Press / to set the minute.
8 Press TIMER to confirm.
The timer is set and activated. »
Activate and deactivate the alarm
timer
Press TIMER repeatedly to activate or
deactivate the timer.
English
EN
To Next Page
Loading...
