Philips DCM3020/12 - Display Brightness and Product Specifications

18
Speakers
Speaker impedance 2 x 60 W, 4 OHM
General information
AC power 220-230V / 50Hz
Operation Power
Consumption
60 W
Standby Power
Consumption
< 12 W
Eco Power Standby
Power Consumption
< 1 W
USB Direct Version 1.1
Dimensions
- Main Unit (W x H
x D)
- Speaker
239 x 141.5 x 230 mm
142 x 307 x 230 mm
Weight
- Main Unit
- Speaker
- Package
1.92 kg
2.55 kg x 2
1.8 kg
USB playability information
Compatible USB devices:
USB flash memory (USB 1.1)•
USB flash players (USB 1.1)•
memory cards (requires an additional •
card reader to work with this unit)
Supported formats:
USB or memory file format FAT12, •
FAT16, FAT32 (sector size: 512 bytes)
MP3 bit rate (data rate): 32-320 Kbps and •
variable bit rate
WMA v9 or earlier•
Directory nesting up to a maximum of 8 •
levels
Number of albums/ folders: maximum 99•
Number of tracks/titles: maximum 999•
ID3 tag v2.0 to v2.3•
File name in Unicode UTF8 (maximum •
length: 16 bytes)
8 Product
information
Note
Product information is subject to change •
without prior notice.
Specifications
Amplifier
Total output power 2 x 60 W RMS
Frequency
response
80 Hz - 16 kHz, ± 3 dB
Signal to noise ratio > 60 dB
MP3 link input 0.5 V RMS 20 k
Disc
Laser type Semiconductor
Disc diameter 12 cm /8 cm
Support disc CD-DA, CD-R,
CD-RW, MP3-CD,
WMA-CD
Audio DAC 24 Bits / 44.1 kHz
Total harmonic
distortion
< 1.5%
Frequency
response
60 Hz -16 kHz
(44.1 kHz)
Signal to noise ratio > 55 dBA
Tuner
Tuning range FM: 87.5 - 108 MHz
Tuning grid 50 KHz
Number of presets 20
EN