Philips DCM3065/51 - Turn on; Play; Play Disc; Play from USB

12 EN
8 Press PROG/CLOCK SET to conrm.
Turn on
1
Press .
» The unit switches to the last selected
source.
Switch to standby
1 When the unit is turned on, press to
switch the unit to standby.
• In standby, press and hold
to switch
from normal standby to Eco power
standby or vice versa.
» In normal standby, the clock (if set)
appears on the display panel.
» In Eco power standby, the backlight on
the display panel turns off.
4 Play
Play disc
1
Press CD to select the disc source.
2 Press on the unit to open the disc
compartment.
3 Insert a disc with the printed side facing
outward, and then press
to close the disc
compartment.
4 If the disc doesn't play, press .
• To stop play, press
.
Play from USB
Note
•
Make sure that the USB storage device contains
playable audio content.
1 Connect the USB storage device into the
connector on the back panel of this
unit.
2 Press USB to select the USB source.
» Play starts automatically.
• To select a folder, press
.
• To select an audio le, press
/ .
• To start play, press
.
• To stop play, press
.
Pause/resume play
1
During play, press to pause/resume
play.