Philips DE5205/00 - Using the Dehumidifier; The Air Quality Light; Turning on and off; Setting the Humidity Level

8 EN
2 Touch the button once to turn on
the appliance (g.h).
» The current humidity level is
displayed on the screen.
» After measuring the air quality
for a short time, the air quality
sensor automatically selects the
color of the air quality light.
» The dehumidier goes to combi
AUTO mode.
3 Touch and hold for 3 seconds to
turn o the appliance.
Setting the humidity
level
You can set the desired humidity level
to 40, 50, 60, 70, or 80 percent.
1 Touch the button one or more
times to set the desired humidity
level, and the humidity indicator
lights up (g.i).
Note
• When the humidity is decreased to
the selected level, the dehumidier
automatically stops dehumidifying
the air, but the fan will continue
working.
• If you do not set the humidity level,
the default humidier is 60%.
• You can touch the button for
5 seconds to display the current
ambient temperature.
Tip
• A comfortable humidity level is from
40RH% to 60RH%.
4 Using the
dehumidifier
The air quality light
Color of the air
quality light
Air quality level
Blue Good
Blue-violet Fair
Red-purple Unhealthy
Red Very unhealthy
The air quality light automatically goes
on when the appliance is switched on,
and lights up all colors in sequence.
In a short time the air quality sensors
select the color that corresponds to
the surrounding air quality of airborne
particles.
Turning on and o
Note
• For optimum performance, close
doors and windows.
• Keep curtains away from the air
inlet or air outlet.
• For optimum dehumidication
eciency, place the dehumidier in
a at, stable surface.
• Before turning on the dehumidier,
check if the power voltage
corresponds to the voltage printed
on the dehumidier.
1 Put the plug of the dehumidier in
the wall outlet.
» The dehumidier beeps.