Philips DE5205/00 - Setting the Child Lock; Using the Light On;Off Function; Draining the Dehumidifier; Emptying the Water Tank

11EN
English
Note
• During defrosting, the dehumidier
operates in clothes dry mode.
• The dehumidier will resume
working and operate the previous
settings after defrosting is
completed.
Setting the child lock
1 Touch and hold the child lock
button for 3 seconds to activate
child lock (g.t).
» "L" displays on the screen for
3 seconds.
» When the child lock is on,
all the other buttons are not
responsive.
2 Touch and hold the child lock
button for 3 seconds again to
deactivate child lock (g.u).
» "UL" displays on the screen for
3 seconds.
Using the light on/o
function
With the light on/o button, you can
switch on or o the air quality light,
the display screen and the function
indicators if desired.
1 Touch the light on/o button
once, the air quality light will go o.
2 Touch the light on/of button
again, the display screen will
dimmed.
3 Touch the light on/o button for
the third time, all lights will be on
again.
5 Draining the
dehumidifier
Emptying the water tank
When the water tank is full:
» The appliance beeps, and the
indicator is on.
» The appliance goes to purication
only mode automatically.
1 Place your ngers in the side recess
of the dehumidier, and gently pull
the water tank out. Hold the sides of
the water tank, and remove it from
the dehumidier (g.v).
2 Empty the water into a sink (g.w).
3 Wipe the outside of the water tank
dry with a clean cloth (g.x).
4 Put the water tank back into the
dehumidier (g.y).
Note
• The dehumidier will resume
working after the water tank is
emptied.
Using the continuous
drainage
The dehumidier can also drain excess
water by attaching a hose. This allows
you to operate the dehumidier without
emptying the water tank.
1 Turn o the dehumidier and
unplug from the wall outlet.
2 Open protective cover of the
drainage hole (g.z).