EasyManua.ls Logo

Philips DE5205/00 - Changing the Fan Speed; Using the Purification Only Mode

Philips DE5205/00
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9EN
English
Note
Do not point the airow of the
dehumidier directly at the body
for a prolonged period of time,
especially where there is someone
who is unable to adjust the
humidity.
When you use the dehumidier
for laundry drying, hang your
clothes from a distance where
water droplets will not drip onto the
dehumidier.
Make sure the air inlet and outlet
are not blocked by the clothes.
Make sure that you dry the clothes
on a safe and secure place from
dropping to block the air inlet and
outlet.
Tip
Direct the louvre until air ows
directly onto the clothes to dry your
clothes more eciently.
Using the purication
only mode
The appliance can be used in
purication only mode.
1 Press the button to access
purication only mode (g.n).
» The appliance operates under
auto mode by default.
» The dehumidifier will stop
dehumidifying the air.
» The and the display on
the screen.
Continuous mode
In continuous mode, the appliance
constantly works with the optimal
dehumidifying settings.
1 Touch the button repeatedly to
select the continuous mode (g.j).
» The and display on the
screen.
Changing the fan speed
You can select the desired fan speed
(Auto,1, 2 ,3 and 4), or clothes dry
mode.
Auto
Touch the fan speed button
repeatedly to select the auto mode
(g.k).
Note
You can adjust the humidity settings
manually by touching the button.
Manual
Touch the fan speed button
repeatedly to select the fan speed
you need (g.l).
Laundry drying mode
Touch the button until is
displayed to select the laundry
drying mode (g.m).
» The dehumidier goes to
laundry drying mode.
» The dehumidier operates under
the highest fan speed.
»
and display on the screen.

Table of Contents

Related product manuals