Philips DE5205/00 - Storage

15EN
English
Note
• Do not touch the pleated HEPA lter
surface, or smell the lters as they
have collected pollutants from the
air.
3 Remove all packaging material from
the new HEPA lter (g.e).
4 Place the new HEPA lter into the
appliance (g.ˆ).
5 Put the plug of the dehumidier in
to wall outlet.
6 Touch and hold the timer button
for 3 seconds to reset the lter
lifetime counter.
7 Wash your hands thoroughly after
changing the HEPA lter.
8 Storage
1 Turn o the dehumidier and
unplug from the wall outlet.
2 Clean the dehumidier, air quality
sensor, empty the water tank and
wash the pre-lter (see chapter
‘Cleaning’).
3 Let all parts dry thoroughly before
storing.
4 Wrap the lter and pre-lter
separately in air tight plastic bags.
5 Store the dehumidier, lters and
pre-lter in a cool, dry location.
6 Always thoroughly wash hands after
handling lters.