Chapter 3: Getting Started 25
Backlight on/off
The DPM provides a backlit display for improved visibility.
This is the menu entry for the display backlight; a check mark next to the symbol
indicates that the backlit display function is enabled. The symbol always shows
the current setting:
Confirm the menu entry selection by pressing the Jog Dial and proceed as
follows:
Enable the backlight; this is the default setting. When you press a button on
the DPM, the DPM display will be backlit for about 6 seconds:
•
Disable the backlight; this setting guarantees a longer lifetime for the DPM's
batteries:
•
Confirm the setting by pressing the Jog Dial and to return you to the DPM
main menu.
To Next Page
Loading...
