Philips DS3205 User Manual

4 EN
3 Get started
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Connect power
This docking speaker can be powered on by
either AC power or batteries.
Battery power
Caution
•
Risk of explosion! Keep batteries away from heat,
sunshineorre.Neverdiscardbatteriesinre.
• Batteries contain chemical substances, so they should
be disposed of properly.
• Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
1 Open the battery compartment.
2 Insert4x1.5VAAbatteries(notsupplied)
withcorrectpolarity(+/-)asindicated.
3 Close the battery compartment.
AC power
Caution
•
Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage printed on
the back of the unit.
• Risk of electric shock! When you unplug the AC
adaptor, always pull the plug from the socket. Never
pull the cord.
• Before connecting the AC adaptor, make sure that you
have completed all other connections.

Philips DS3205 Specifications

General

RMS rated power	10 W
Audio output channels	- channels
Battery type	AA
AC input voltage	100 - 240 V
Built-in charger	Yes
Power source type	AC
AC input frequency	50 - 60 Hz
Battery life (max)	8 h
Number of batteries supported	4
Bluetooth	No
Headphone connectivity	3.5 mm
Compatibility	iPhone 5
Apple docking compatibility	iPod Nano 7, iPod Touch 5
Product color	Black

Weight and Dimensions

Depth	120 mm
Width	224 mm
Height	162 mm
Weight	1100 g
Package depth	145 mm
Package width	240 mm
Package weight	1330 g