22
If connection is successful. the unit beeps and the » indicator turns
on stably.
If the pairing cannot be completed within one minute, the »
indicator flashes slowly.
Tip
If your Bluetooth device is already paired with DS8550 before, you just need to find •
out the “PHILIPS DS8550” on your Bluetooth menu, then confirm the connection.
To disconnect Bluetooth device,
Move it beyond the communication range; or•
Press •
; or
Turn off the connected device•
Play audio files from bluetooth devices
Note
Make sure the Bluetooth connection between the unit and the device is active. •
To start play, press •
on the remote control.
To pause/resume play, press •
again.
To track up/down, press forward/backward keys.•
Tip
While listening to iPad via Bluetooth, you can use the provided iPad stand to hold •
up your iPad.
EN
To Next Page
Loading...
