Philips DS8550 - Listening to Docked Devices; Audio Playback & Charging; Playing from Bluetooth Device; Pairing Bluetooth Devices

21
Remove the iPod/iPhone/iPad
1 Pull the iPod/iPhone/iPad out of the dock.
Listen to the iPod/iPhone/iPad
1
Ensure that the iPod/iPhone/iPad is loaded correctly.
2 Press to select dock mode.
3 Press .
The connected iPod/iPhone/iPad starts play. »
To pause/resume play, press •
.
To skip to a track, press fast forward/backward keys.•
To search during play, press and hold fast forward/backward •
keys, then release to resume normal play.
To navigate the menu, press • MENU, then press up/down keysto
select, and press OK to confirm.
Charge the iPod/iPhone/iPad
When the unit is connected to AC power, the docked iPod/iPhone/iPad
begins to charge.
Tip
You can also charge your iPod/iPhone via the built-in battery. Before charging your •
iPod/iPhone via the built-in battery, ensure the Fidelio battery-charging function is
turn on.
You cannot charge your iPad via the built-in battery. To charge your iPad, connect
•
the unit to AC power.
Play from Bluetooth device
Pair with Bluetooth deivces
1
Press to select Bluetooth source.
The unit starts searching for Bluetooth device. The Bluetooth »
indicator under
button on the main unit flashes rapidly.
2 Turn on Bluetooth function on your device.
3 When “PHILIPS DS8550” displays, select it to start connection.
4 When prompted for a password, enter “0000”.
English
EN