Philips DS8800W - Page 12

12
3 Select Settings -> Wi-Fi on your iPod
touch/iPhone/iPad.
• Or enter the list of available wireless
networks on your PC/Mac.
4 Select Philips Fidelio AirPlay from the list
of available networks.
Philips Fidelio AirPlay
Tip
•
To change the name of the unit for AirPlay, proceed
with steps in ‘Scenario 2: Connect to a non-WPS
router’ below.
• For some wireless routers, you may need to hold the
WPS button for WPS connection. See the user manuals
of the specic routers for details.
Scenario 2: Connect to a non-WPS
router
You can connect the unit to a non-WPS router
through
• an iOS 4.2 (or later) enabled iPod
touch/iPhone/iPad
• a Wi-Fi enabled PC or Mac installed
with iTunes 10 (or later)
Connect DS8800W to your iPod
touch/iPhone/iPad or PC/Mac
1 Press and hold WI-FI SETUP on the back
of the main unit for more than 5 seconds.
» The
indicator blinks in green and
yellow alternately.
2 Wait for about 45 seconds so that Philips
Fidelio AirPlay is available in the list of Wi-
Fi networks.
WPS
EN