Philips DVDR3300H - Page 35

35
Record on Hard Disk (continued)
TIPS: Set the appropriate recording mode for HDD recording. The same recording mode will be
used for recording from HDD to a recordable DVD, see page 29.
D
Use the numeric keypad 0-9 to enter
the VIDEO Plus+
®
programming number.
(e.g.,: 5-312-4 or 5,312 4, key in ‘53124’).
 Use   keys to move to the
previous/next entry  eld.

Press CLEAR on the remote control will
clear the VIDEO Plus+® entry.
E
The default recording settings for record
mode, repeat setting and VPS/PDC are
used. To make changes, move to the
respective  eld in the menu.
{ Repeat }
Press OK, use  keys to select the repeat
recording setting (None, Mo~Fr, Weekly) and
press OK again to con rm.
{ VPS/PDC }
Press OK to activate ( ) or deactivate
( ) the VPS/PDC setting, see page 34 for
more information.
F
Once complete, select { Continue } in
the menu and press OK.
 The timer setup menu appears.
Timer Setup
Repeat
VPS/PDC
None
00
00
00
00
Program
To exit Press TIMER
/
Date
----
Time
:
Start
00
00
:
End
Continue
G
If the programme information is correct,
select { Continue } in the menu and
press OK.

Otherwise, move to the respective  led
and change the timer programme
information manually.
Timer List
26/03 TELET 18:30 / 19:00
Date Pg. Start End VPS/PDC
Total recording time : 00:30
Press OK to edit entry. CLEAR to delete
To exit Press TIMER
26/03 CH08 20:30 / 21:00
-- / -- - - - -- : -- / -- : --
-- / -- - - - -- : -- / -- : --
H
Press TIMER to con rm and exit the
menu.
 The ‘TIMER’ icon will light up on the
display panel if a timer recording is set.
 If the recorder is not in standby mode,
a noti cation message will appear before
the timer recording begins. If you ignore
the message, the timer recording will not
start unless you have switched to the
respective channel.
dvdr3300h_uk_eng_17233d.indd 35dvdr3300h_uk_eng_17233d.indd 35 2005-10-19 10:41:25 AM2005-10-19 10:41:25 AM