Philips DVDR3440H - Using the Remote Control

English
14
Remote Control (continued)
Using the remote control
A Open the battery compartment.
B Insert two batteries of type R06 or AA,
following the indications (+-) inside
the compartment.
C Close the cover.
D Aim the remote control directly at the
remote sensor (IR) on the front panel.
E Select the source you want to control by
pressing the TUNER, HDD or DVD key
on the remote control.
F Select the desired function (for example
., >).
CAUTION!
– Remove batteries if they are
exhausted or if the remote control
will not be used for a long time.
– Do not mix batteries (old and
new or carbon and alkaline, etc).
– Batteries contain chemical
substances and should be disposed
of properly.
1
3
2
dvdr3440h_05_eng_24282.indd 14dvdr3440h_05_eng_24282.indd 14 2007-05-28 5:19:54 PM2007-05-28 5:19:54 PM
Downloaded From Disc-Player.com Philips Manuals