Philips DVDR3440H - Page 63

English
63
SETUP settings
Setup Menu Options (continued)
Manual Program
2) Use ST keys to select one of the options and press X.
{ Fine Tuning } – Select this to  ne-tune the TV channel manually
if the reception is poor.
– Use WX keys to  ne-tune the frequency.
{ Standard } – Select this to set the system that produces the
least distortion of picture and sound. Press OK
on the remote control to con rm the setting.
(See chapter “TV System Guide” at the back of
this manual for information).
{ NICAM } – Select this to receive dual language broadcasts
and to improve the sound quality of the TV
channel.
– Use ST keys to select { On } or { Off }, then
press OK on the remote control to con rm the
setting.
{ Audio } – For dual language broadcasts, select this to
switch between stereo (original) and the
additional audio language.
– Use ST keys to select { Dual A } or
{ Dual B }, then press OK on the remote
control to con rm the setting.
{ Decoder } – If you have connected the recorder to an
external decoder, select { On } and press OK to
con rm. (for the channel from decoder).
{ Skip } – Set the channel to be skipped. The skipped
channels can only be accessed by pressing the
corresponding number key on the remote
control.
– Use ST keys to select { Yes } if you wish to
skip the channel and press OK on the remote
control to con rm the setting.
3) To con rm all the changes, select
OK
OK
and press OK on
the remote control to exit to the previous screen.
Manual Program
Programme Number
OK
PAL B/G
Standard
Decoder
P001 CH023
Off
Fine Tuning
OK
OK
CANCEL
0 5 8 . 9 8 Mhz
Frequency
Frequency
Search Type
Skip
No
Audio
Dual A
NICAM
On
dvdr3440h_05_eng_24282.indd 63dvdr3440h_05_eng_24282.indd 63 2007-05-28 5:20:00 PM2007-05-28 5:20:00 PM
Downloaded From Disc-Player.com Philips Manuals