Philips DVDR3576H/37 - DVC to HDD; DVD Dubbing

54 EN54 EN
DVC to HDD / DVD Dubbing
Preparing for DV dubbing (DVC to HDD):
• Make sure your DVC is in video mode.
Preparing for DV dubbing (DVC to DVD):
• Insert a recordable DVD.
• Make sure your DVC is in video mode.
If you are dubbing to the HDD, press [HDD] first.
If you are dubbing to a disc, press [DVD] first.
1
Use [SOURCE / USB] or [CH / ] to
select “E3 (DV-IN)” channel.
AB-1234
0:00:00
E3 (DV-IN)
2
Press [REC MODE] to select a
recording mode.
(Refer to page 39.)
3
Press [INFO].
4
With “Control” highlighted, press
[OK] to display the available devices
to control with the remote control of
this unit. Use [K / L] to select “DV
Input”, then press [OK].
e.g.) DVC to DVD dubbing
AB-1234
0:00:00
E3 (DV-IN)
DV Audio Stereo1
Start Rec
Control DVD
1/ 1 1/ 1
+ RW
DVD SP 2h00m
Now you can operate your DVC with the remote
control of this unit.
Before recording from DVC, refer to page 51 for
connection instructions.
HDD & DVD RECORDER
DUBBING
E2H42UD_DVDR3576H-37_EN.indd 54E2H42UD_DVDR3576H-37_EN.indd 54 2007/12/28 11:15:212007/12/28 11:15:21