Philips EasySense - Page 2

EasySense_PLt-16199DS_ES Adv Grouping DS_061818 06/18 page 2 of 12
EasySense xture-mount sensor
Features
• Occupancy sensing, daylight harvesting and
task tuning in one device
• Scene setting and occupancy sharing
• Compact size, 2-wire connection
• Operates with Philips Advance Xitanium SR
LED drivers and qualied wireless switches
• Conguration of sensor parameters–
if desired – using NFC or IR via intuitive
Android-based Philips eld apps
• DLC qualied: Listed on the QPL for
Networked Lighting Controls
Benets
• Combines functionality to reduce need for
multiple components
• Quick task tuning in the eld to optimize light
and power levels
• Enables auto-o/manual-on and auto-o/
partial-on application
• Cost-eective solution for energy-savings
and code-compliancy strategies
• 5-year limited system warranty with Philips
Advance Xitanium LED drivers
1
• Conguration and commissioning from
the oor
Applications
• Conference rooms
• Individual oces
• Open oces
• Classrooms
• Storage and break areas
• Restrooms
• Lobbies
• Stairways
1. View limited warranty at http://www.usa.lighting.philips.com/support/support/warranty.
Continued on next page.
Product Data
All specications are typical and at 25°C Tcase unless otherwise specied.
Ordering Information
Order Code SNS200
Full Product Name EasySense Fixture-Mount Sensor
Carton Quantity 50 pcs/carton
Physical Information
Overall Dimensions 1.97in x 0.75in x 1.24in / 50mm x 19.0mm x 31.5mm
Housing (Luminaire Hole) 1.73in x 0.67in / 44mm x 17mm (l x w)
Net Weight per Piece 0.6oz / 17gr
Volume Required Inside Luminaire
(LxWxH)
1.87in x 0.75in x 0.95in / 50mm x 19mm x 24mm
Color White
Connectors WAGO 20160 2-pole terminal block rated for AWG24 to AWG18 solid or stranded wire
Electrical Information
Input Voltage Powered by SR driver low-voltage interface
Current Consumption 13mA
Nominal Power Consumption 200mW
Standby Power < 1 W on luminaire level, including driver standby power
Occupancy Sensing
Type Passive infrared (PIR)
Enable/Disable Default enabled
Occupancy Mode Auto-on/o, Manual-on/o, Manual-on/auto-o; Red LED indicates occupancy detected
Group Occupancy Sharing Enabled/disabled
Group Lighting Behavior Background level, task level
Eco-On Level 5-100%
Hold Time 0.5 - 60 minutes
Viewing Angle X=72°, Y = 86° ( See detection pattern)
Background Light Level 0-100%
Prolong Time 0 minutes - innity
Grace Fading 0-25 seconds
Response Time/Fading to Switch On/O 0.7 seconds