Philips EasySense - Page 3

EasySense_PLt-16199DS_ES Adv Grouping DS_061818 06/18 page 3 of 12
EasySense xture-mount sensor
Product Data (continued)
All specications are typical and at 25°C Tcase unless otherwise specied.
Compatible LED Drivers
Daylight Sensing
Enable/Disable Default enabled
Auto-Calibration Upon power-up
Viewing Angle 40° (half value sensitivity); 2% cut-o point at 75°
Task Tuning
Full Light Setting 5-100%
Environment & Approbation
Operating Ambient Temperature Range 0°C to 55°C
Operating Humidity 0 – 95% non condensing
Storage Temperature -25°C to 85°C
Storage Humidity 0-95% non condensing
Max Case Temperature (Tcase) 55°C
Agency Approbations UL, CSA; FCC; Tested and approved for use in plenums
Certication California Title 20
Warranty 5 years
Digital Interface Xitanium SR
Other
Wireless Protocol Zigbee, IEEE 802.15.4
Encryption AES-128
LED Status Indicators Red, Yellow. Yellow LED on: Vacancy & Sensor is functional; Red LED on: Occupancy detected
No. Drivers per Sensor 4 max
Max Distance Switch-to-First-Fixture 33ft line-of-sight
Max Distance Fixture-to-Fixture 40ft line-of-sight
No. Switches per Group 5 max
Field Conguration via NFC or IR, parameters set via Philips eld apps
Driver Model Number Description
XI040C110V054VPT1 Xitanium 40W 0.1-1.1A 27-54V 120-277V SR
XI075C200V054VPT1 Xitanium 75W 0.1-2.0A 27-54V 120-277V SR
Specications available at www.philips.com/xitaniumsr/na.