Removal of the Mainboard
. Remove all the electric connections
. Keep pressing on the left holder to be able to release the board.
The mainboard contains several xed wires which cannot be disconnected from the board.
The UI cable is also xed to the mainboard.
To completely remove the mainboard from the appliance, disconnect all xed wires from their destination component.
Removal of the Pump
. Pull the pump holder to the right
. Remove all the connection
When reassembling the pump, ensure to use hot melt to x the thermal fuse.
Disassembly - and Reassembly advice
To Next Page
Loading...
