Need help?Do you have a question about the Philips EP 800 Series and is the answer not in the manual?
General| Brand | Philips |
|---|---|
| Model | EP 800 Series |
| Category | Coffee Maker |
| Language | English |
Explains the different models and their user interfaces.
Details the water flow path and components within the machine.
Illustrates the electrical wiring and component connections.
Lists technical details like drink volumes, capacities, and operating parameters.
Outlines the necessary tools for service, repair, and calibration.
Specifies conditions and procedures for accurately measuring coffee temperature.
Details conditions and procedures for measuring milk froth temperature.
Guides on connecting the coffee machine to a Wi-Fi network.
Instructions to reset all network settings and connections to factory defaults.
Explains the internal gear motor operation and heating sequence.
Describes the grinder's motor, transmission, and blocking detection.
Details the LatteGo milk container assembly and its function.
Explains the water level sensor and the 'Water low' message.
Describes the filter's purpose, installation, and usage for limescale reduction.
Details how often descaling is needed based on water hardness.
Guides on greasing points and brew unit positions for maintenance.
Step-by-step guide to remove the coffee machine's outer housing.
Instructions for safely removing the User Interface board.
Steps to remove the coffee grinder assembly from the machine.
Procedures for removing the machine's electrovalves.
Guide to safely remove the brew unit gear motor.
Steps to remove the heating boiler unit.
Instructions for removing the water flowmeter.
Steps for removing the main control board.
Guide to safely remove the water pump.
Instructions for removing the dispensing spout assembly.
Steps to carefully remove the microswitch.
Explains the purpose of test mode for diagnostics.
Details how to enter and navigate test mode levels.
Entry level for resetting the error log.
Testing buttons, LEDs, and buzzer sound.
Testing loads (motors, pump, etc.) and sensors.
Detailed button press sequences for Level 1 tests.
Detailed sequences for testing loads and sensors in Level 2.
Details how to activate and what happens during Steam Out.
Details various settings like temperature, aroma, and error logs.
Step-by-step guide for descaling the machine to remove limescale.
Fixes for pump movement and service door issues.
Using the EPSC tool for software upload and diagnostics.
Steps to turn off the AquaClean filter notification.
Instructions to turn off button sound feedback.
How to restore default drink customization settings.
Outlines the steps for diagnosing and repairing the machine.
To Next Page
